Quantcast

Connecting Revue to my network

Discussion in 'Google TV FAQs' started by JimMariner, Oct 20, 2010.

  1. JimMariner

    JimMariner Member

    Joined:
    Oct 5, 2010
    Messages:
    373
    Likes Received:
    11
    Trophy Points:
    18
    Location:
    SE Florida, Logitech Revue
    How do I connect Logitech Revue to my Network?

    Ethernet connection

    1. Make sure that Revue is physically connected to your entertainment system, and the system is powered on.
    2. Make sure an Ethernet cable is connected from your Internet modem or router, to the Ethernet port on the back of the Revue.
    3. Proceed through the on-screen setup process.
    4. At the "Connect to the Internet" screen, select Ethernet as your connection type.
    Wireless/Wi-Fi connection

    1. Make sure Revue is physically connected to your entertainment system, and the system is powered on.
    2. Make sure you know your network name and password.
    3. Proceed through the on-screen setup process.
    4. At the "Connect to the Internet" screen, select Wireless as your connection type. Revue will scan for wireless networks in your area and display a list.
    5. Select your network by name from the list.
      NOTE: If your wireless network is not listed or you have the SSID hidden, you will have to manually add your network by selecting “Other”. You will need to know your network name, password, and type of encryption used.
    6. Enter your network password.
    7. Revue will be connected to the wireless network.
    Source
     

Share This Page

Search tags for this page

logitech DMA not connected